---

name: rust-performance-best-practices description: Expert-level Rust performance optimization guidelines for build profiles, allocation, synchronization, and I/O. This skill should be used when writing, reviewing, or optimizing Rust code for performance. Triggers on tasks involving slow Rust code, large binary size, long compile times, LTO configuration, release profile tuning, allocation reduction, clone avoidance, lock contention, BufReader/BufWriter, flamegraph analysis, or any Rust performance investigation.

Rust Performance Best Practices

Expert-level performance optimization guide for Rust. Contains 41 rules across 8 categories with real benchmarks, failure modes, and profiling workflows.

The Optimization Workflow

CRITICAL: Most Rust code doesn't need optimization. Profile first, optimize second.

┌─────────────────────────────────────────────────────────────┐
│                   OPTIMIZATION WORKFLOW                      │
├─────────────────────────────────────────────────────────────┤
│                                                             │
│  1. MEASURE FIRST                                           │
│     └── Profile before changing anything                   │
│     └── Use cargo flamegraph, perf, or heaptrack           │
│     └── Identify actual bottlenecks (don't guess!)         │
│                                                             │
│  2. CHECK BUILD SETTINGS                                    │
│     └── Release mode? (10-100x vs debug)                   │
│     └── LTO enabled? (5-20% improvement)                   │
│     └── Target CPU? (10-30% for SIMD)                      │
│                                                             │
│  3. FIX ALGORITHMIC ISSUES                                  │
│     └── O(n²) → O(n log n) matters more than micro-opts   │
│     └── Check data structure choices                       │
│     └── Avoid unnecessary work                             │
│                                                             │
│  4. REDUCE ALLOCATIONS                                      │
│     └── Pre-size collections (with_capacity)               │
│     └── Reuse buffers (clear + reuse)                      │
│     └── Avoid cloning (borrow instead)                     │
│                                                             │
│  5. OPTIMIZE HOT LOOPS                                      │
│     └── Iterators over indices                             │
│     └── Reduce lock scope                                  │
│     └── Batch I/O operations                               │
│                                                             │
│  6. MEASURE AGAIN                                           │
│     └── Verify improvement with benchmarks                 │
│     └── Check for regressions elsewhere                    │
│     └── Document the optimization                          │
│                                                             │
└─────────────────────────────────────────────────────────────┘

Quick Profiling Commands

# CPU profiling (Linux)
cargo flamegraph --bin myapp
perf record -g ./target/release/myapp && perf report

# Memory profiling
heaptrack ./target/release/myapp && heaptrack_gui heaptrack.myapp.*.gz
DHAT_LOG_FILE=dhat.out cargo run --release && dh_view.py dhat.out

# Benchmark
cargo bench                          # All benchmarks
cargo bench hot_function             # Specific benchmark

# Check allocations
MALLOC_TRACE=/tmp/mtrace.log ./target/release/myapp
mtrace ./target/release/myapp /tmp/mtrace.log

# Assembly inspection
cargo asm my_crate::hot_function --rust

# syscall count
strace -c ./target/release/myapp 2>&1 | head -20

Common Scenarios → Rules

"My Rust program is slow"

Is it running in debug mode?
├── YES → build-release-profile (10-100x speedup)
└── NO
    │
    Where does flamegraph show time?
    ├── malloc/free → alloc-* rules (with_capacity, reuse buffers)
    ├── Mutex::lock → sync-* rules (RwLock, atomics, shorter scope)
    ├── read/write syscalls → io-* rules (BufReader/BufWriter)
    ├── clone/drop → alloc-avoid-clone, use references
    └── Your code → iter-* rules, algorithm improvements

"My binary is too large"

1. Enable LTO: build-enable-lto (10-20% smaller)
2. Set opt-level = 'z': build-opt-level (optimizes for size)
3. panic = 'abort': build-panic-abort (removes unwinding code)
4. Strip symbols: strip = true in Cargo.toml
5. Remove debug info: debug = 0

"High memory usage"

1. Pre-size collections: alloc-*-with-capacity
2. Reuse allocations: alloc-reuse-buffers
3. Avoid cloning: alloc-avoid-clone
4. Use slices in APIs: alloc-use-slices-in-apis
5. Consider arena allocators: bumpalo crate

"Lock contention / thread scaling"

1. Profile: lock_api::ReentrantMutex or parking_lot profiling
2. Reduce lock scope: sync-keep-lock-scope-short
3. Read-heavy? → sync-use-rwlock
4. Simple counters? → sync-use-atomics
5. Message passing? → sync-use-channels
6. Thread-local + periodic flush for stats

"Slow file I/O"

1. Wrap in BufReader/BufWriter: io-use-bufreader, io-use-bufwriter
2. Flush before returning: io-flush-bufwriter (data loss prevention!)
3. Reuse line buffer: io-read-line-with-bufread
4. Consider mmap for random access: memmap2 crate

Rule Categories

Priority	Category	Typical Impact	Prefix
1	Build Profiles	10-100x (debug→release)	build-
2	Benchmarking	Enables measurement	bench-
3	Allocation	2-50x for allocation-heavy code	alloc-
4	Data Structures	2-10x for hot paths	data-
5	Iteration	2-5x for loop-heavy code	iter-
6	Synchronization	5-100x for contended code	sync-
7	I/O	10-100x for I/O-bound code	io-
8	Unsafe	5-30% in tight loops (experts only)	unsafe-

1. Build Profiles (CRITICAL)

These apply to ALL Rust code. Check these first.

Rule	Impact	One-liner
build-release-profile	10-100x	Always ship release builds
build-opt-level	2-5x	opt-level=3 for speed, 'z' for size
build-enable-lto	5-20%	LTO enables cross-crate optimization
build-codegen-units	5-15%	codegen-units=1 for max optimization
build-panic-abort	Binary size	panic='abort' removes unwinding
build-target-cpu	10-30%	target-cpu=native for SIMD
build-pgo	5-20%	Profile-guided optimization
build-incremental-off	5-10%	Disable for release builds

2. Benchmarking (REQUIRED)

You can't optimize what you don't measure.

Rule	Purpose
bench-cargo-bench	Use cargo bench with criterion
bench-bench-profile	Bench profile enables optimizations
bench-black-box	Prevent dead code elimination
bench-avoid-io	I/O variance destroys measurements

3. Allocation

Every allocation is a syscall. Reduce them.

Rule	Impact	Pattern
alloc-vec-with-capacity	2-10x	Vec::with_capacity(n) not Vec::new()
alloc-string-with-capacity	2-5x	String::with_capacity(n)
alloc-hashmap-with-capacity	2-5x	HashMap::with_capacity(n)
alloc-reuse-buffers	2-50x	.clear() and reuse, don't reallocate
alloc-use-slices-in-apis	Flexibility	&[T] not Vec<T> in parameters
alloc-avoid-clone	2-10x	Borrow &T instead of clone()

4. Data Structures

The right data structure beats micro-optimization.

Rule	When
data-avoid-linkedlist	Almost always (Vec wins)
data-choose-vecdeque-for-queue	FIFO queues
data-choose-map-type	HashMap=O(1), BTreeMap=sorted
data-use-entry-api	Insert-or-update patterns
data-repr-transparent	FFI newtypes

5. Iteration

Iterators are as fast as loops and safer.

Rule	Impact	Pattern
iter-avoid-collect-then-loop	2-3x	Chain iterators, don't collect
iter-use-lazy-iterators	2-3x	.filter().map() not intermediate vecs
iter-use-any-find	Short-circuit	.any() not .filter().count() > 0
iter-use-retain	In-place	.retain() not .filter().collect()
iter-use-binary-search	O(log n)	.binary_search() on sorted data

6. Synchronization

Locks are expensive. Minimize contention.

Rule	Impact	When
sync-share-with-arc	350x vs clone	Share large data across threads
sync-use-rwlock	7x for reads	90%+ reads, few writes
sync-keep-lock-scope-short	4x	Minimize code under lock
sync-use-channels	3-4x	Message passing vs shared state
sync-use-atomics	20x	Simple counters, flags

7. I/O

Every syscall costs. Buffer them.

Rule	Impact	Pattern
io-use-bufreader	50x	Wrap File in BufReader
io-use-bufwriter	18x	Wrap File in BufWriter
io-flush-bufwriter	CRITICAL	Must flush or lose data!
io-read-line-with-bufread	53x	Reuse String buffer with read_line

8. Unsafe (Expert Only)

Only after profiling proves these matter.

Rule	Impact	Risk
unsafe-get-unchecked	5-30%	UB if bounds wrong
unsafe-use-maybeuninit	20-100x alloc	UB if read before write
unsafe-avoid-transmute	Correctness	Prefer safe alternatives
unsafe-repr-transparent	Zero-cost	Required for FFI newtypes

Decision Trees

When to use with_capacity?

Do you know the size?
├── YES, exact → with_capacity(exact)
├── YES, approximate → with_capacity(estimate)
└── NO
    │
    Will it grow frequently?
    ├── YES → Start bigger or use reserve()
    └── NO → Vec::new() is fine

Mutex vs RwLock vs Atomics?

Is it a simple counter/flag?
├── YES → Atomics (20x faster)
└── NO
    │
    What's the read/write ratio?
    ├── Mostly reads (>90%) → RwLock
    ├── Mostly writes → Mutex
    └── Mixed → Mutex (simpler)

    Consider: parking_lot > std for all of these

When is unsafe get_unchecked worth it?

Did you profile and find bounds checks are the bottleneck?
├── NO → Don't use it
└── YES
    │
    Did you check if LLVM already removed the bounds check?
    ├── NO → Check assembly first (cargo asm)
    └── YES, still there
        │
        Can you use iterators instead?
        ├── YES → Use iterators (same speed, safe)
        └── NO → get_unchecked with documented invariants

Reading Rules

Each rule file in rules/ contains:

• Quantified impact with real benchmark numbers
• Visual explanations of how the optimization works
• Incorrect examples showing common mistakes
• Correct examples with best practices
• When NOT to apply - trade-offs and edge cases
• Common mistakes to avoid
• Profiling commands to identify the issue
• References to official docs

Full Compiled Document

For all rules in a single file: AGENTS.md